Using LineageOS on the FP2

Help Fairphone 2
,
367

Still the same, connection established, first screen, freeze.
https://pastebin.com/dXyzh1G4

368

can you check what you have in file
/data/misc/wifi/p2p_supplicant.conf

370

disable_scan_offload=1
driver_param=use_p2p_group_interface=1
update_config=1
device_name=Android_55af
device_type=10-0050F204-5
config_methods=virtual_push_button physical_display keypad
p2p_ssid_postfix=-Android_55af
persistent_reconnect=1
p2p_no_group_iface=1
pmf=1
p2p_search_delay=100

network={
ssid=“DIRECT-6z-Schmul’s Fire TV”
bssid=72:75:48:ad:dd:ce
psk=[some stuff]
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP
auth_alg=OPEN
disabled=2
}

371

To come back to my own question, I installed Lineage OS today and Miracast is working perfectly for me. I’m impressed so far.

2 Likes
372

@max_seabrooke, @AnotherElk
Does this problem still exist on your phone?
I have the same problem with a new FP2, using the latest lineage-14.1-20171004-UNOFFICIAL-FP2 and modem-17.09.3.zip. The device is encrypted now (but the problem was the same without encryption) and behaviour is the same as described by @max_seabrooke.

373

5 posts were split to a new topic: Xposed on LineageOS

374

Is anyone able to get an IPv6 address via tethering? This worked for me in FP Open OS, but seems broken on LineageOS.

My provider offers IPv6 which works fine with the phone itself (after configuring the APN settings to use dual stack), but the devices that connect via tethering cannot get an IPv6 address.

1 Like
375

Slightly off topic: In Fairphone OS (with GMS) IPv6 tethering once used to work, but is broken since the Android 6 upgrade.

Did this work for you in the Open OS even after the Android 6 upgrade?

1 Like
376

I’ve been abroad during the summer and could not test it (provider did not support IPv6 on pre-paid plans :sob:). It worked in FP Open with Android 5 though.

377

So I guess it’s save to assume that this only worked in Android 5 (FPOS / Open OS) and is broken in both Android 6 (FPOS / Open OS) and 7 (LineageOS).

Progress, yeah! :worried:

1 Like
378

Yeah, it’s still an issue on my phone. I also have the latest October build.

I still also have a big problem with random reboots, especially in the middle of the night because the ticking sound and screen lighting up on the encryption unlock wakes me up. @chrmhoffmann @snevas Is there anything I could look for in the last_kmsg.txt file that would show me the cause of this?

Thanks

379

Yes, it’s still the same. Luckily not a very troublesome problem.

380

I also suffer from reboots during the night. I don’t know what triggers them, (I suspect it could be Telegram delivering a notification, but I am not sure). It happens during the night, without flight mode and not connected to a charger. I am on the latest build from October 4th with modem files from 17.9.3.
Can I provide some helpful logs or so?

381

Yes, please always attach /proc/last_kmsg to any reboot issue reported. Otherwise we can’t do anything at all.

Chris

PS: not sure if we can do anything if there’s last kmsg but without it’s clear we can’t.

1 Like
382

I’m having the same problem!
Phone is rebooting instead of powering off.

Just got a new Fairphone 2 (new camera modules) and auto-updated to the newest Fairphone OS (FP2-gms-17.10.1), which should get the modem also to a recent version I guess. “Power off” worked fine!

@snevas
Then I installed twrp-3.1.1-1-fp2.img and lineage-14.1-20171004-UNOFFICIAL-FP2.zip from here:

WORKAROUND:
Reboot into recovery (tested with TWRP 3.1.1-1) and choose “Power off” in recovery.

1 Like
383

Hello,

I am sorry for my English which is very bad (I am french).

I received my FP2 on October 4th and I installed twrp-3.1.1-1-fp2 and lineage-14.1-20171004-UNOFFICIAL-FP2.

I have the same problem as you:

  • Random reboot (even without using it).
  • The phone restarts when I turn it off.

Concerning the problem of random reboot, for my part, it does not reboot at night with the airplane mode activated.

I can not find the file / proc / last_kmsg with adb:
“adb shell cat / proc / last_kmsg
/system/bin/sh: cat: /: Is a directory
/system/bin/sh: cat: proc: Is a directory
/system/bin/sh: cat: /: Is a directory
/system/bin/sh: cat: last_kmsg: No such file or directory”

384

It is cat /proc/last_kmsg (with the only space being after cat).

With the spaces, you try to cat / (which is a directory), then proc (which is a directory), then / again (…), then last_kmsg in the current directory (where there is no such file because it is in the proc directory).

385

Thank you.
Sorry, I’m really bad.
This is: adb shell cat /proc/last_kmsg

The file is attached:

last_kmsg.pdf (166,2 Ko)

386

No worries …

  • We were all really bad at this computer stuff once.
  • I’m bad with [insert name of poor little plant barely scraping through life in the corner of your room] instead.
  • I can still remember when I was bad with … wait … now I feel old. Sad.
  • Ooooh … a poll!
  • “Who’s BAD?”
0 voters
8 Likes
387

Have you noticed problems with the focus of the new FP2 camera? Since I switched to the new FP2 camera, I have the feeling that the autofocus does not work optimal.

(14.1-20171016-UNOFFICIAL-FP2, Baseband 4437.1-FP2-0-07)