The same thing happens on my Fairphone 3 (which is 3 years old). A few months ago it started not charging sporadically (I would leave it plugged in, and after half an hour it hadn’t charged at all, despite showing the charging LED), so I started to check and sometimes I had to unplug it and plug it in again a couple of times.
Since a couple of weeks ago, the behaviour is terrible: sometimes it doesn’t detect the cable, sometimes it detects it (the led light is ON) but it doesn’t charge, sometimes it charges very slowly, sometimes it only charges if I turn it off, sometimes it detects it right away (now almost never)… the truth is that every time I have to charge it, I get anxious, because I can spend half an hour trying, turning it off, turning it on… and maybe at some point I can’t charge it anymore (and I have no other phone available to use).
I have always used the original Fairphone charger and cable. Since I’ve had the problems, I’ve tried different cables and chargers (of good quality and some new ones), and I’ve had the same problems with all of them. I’ve also tried cleaning the contacts with a brush, removing and connecting the battery, SIM, SD… and yesterday I updated the firmware in case it was a software problem, but it’s still the same.
Maybe it’s what @OldRoutard says. I’ll try to get the materials and clean it, but first I’ll try to make a copy of everything I have on the phone (I’m working on it, because I was thinking of factory resetting it to see if that solves the problem). If it doesn’t work, maybe I’ll try to buy the lower module, which is what I had in mind in the first instance… but seeing that it didn’t work for you, it discouraged me.
Thanks to all of you who suggest solutions and try to help!
Same symptom with my FP3+ for some days now. Phone is about 1,5 years old (/e foundation). Using original fairphone cable. Sometimes charging led switches on after plug off, turning the cable, plug in again. And no, phone doesn*t get hot. I did not do any action to take a look for the reason, but now found this threat …
The same for me since a few days… The fp3 charges but very very slowly (18% → 45% in two days) but starting to 45% it charges normally (less than 1 hour).
I order a knew bottom module but I don’t believe in a hardware problem…
After getting some isopropyl alcohol, some cotton buds and a suitable screwdriver, I opened the phone and cleaned all the contacts. Although the problem was apparently solved after that, there were a couple of weeks where the charging was still unreliable (it switched from slow to fast several times, and sometimes didn’t recognise the charger); however, it charged much better than before the cleaning (as where at best it would only charge 15%/20% in 8 hours). Now, and for the last two weeks, it detects the charger and it is charging perfectly… let’s see how long it lasts like this
P.S. I bought some covers for the USB-C port, to prevent any more dirt or moisture getting into the contact from now on. I hope this will extend its lifespan.
One of the main problems I had during this process is that, as I had to open the phone other several times, I have several stripped screws, and it was very difficult to open it. Do you know where I can buy the screws for the Fairphone 3? It would be ideal if they sold them in the FP shop.
By the way, a few days ago the screen wouldn’t turn on properly when unlocked, it was at a much lower minimum brightness than the normal minimum brightness, and the screen was flickering. After fiddling with the phone and tightening it I managed to get the screen to work normally again, but this happened many times on that day… I hope it’s nothing serious and it’s simply because the screws are not too tight… but the truth is that I’ve had a few problems lately with my Fairphone 3
@Lena_Ka, have you been able to solve your problems by cleaning the port too? Or have you replaced it completely? I’m thinking of doing it if it fails again, but I’m afraid that I won’t be able to open it because of the problem with the screws…
Cleaning my Fairphone 3 nor buying a new battery solved my charging problems. They started a few months ago by dropping the max. amount energy until my phone said: 1 procent energy do not unplug, your phairphone is charging, at which point a loop entered the phone: starting again, saying do not unplug, charging (but not really), starting again, etc. A new battery made it a bit better, charging went up to about 20-40 percent, but this weekend it dropped again tot the 1 percent level and the loop. So now? This is my second Fairphone, the first one lasted 2 years this one also. That’s not how fair things should be, I guess. Hope that someone can give me back some positivity and belief in the concept with a solution!
Thanks Amoun, but I have no influence on what happens: when my phone is unplugged I cannot do anything, so I cannot put it on or off, and when its plugged it gets in the loop immediately. I Iive in Utrecht, The Netherlands, where I cannot find a #fairphoneangel…