I used (and use) this app
as well, but for me it does not prevent the random reboots. @d2w what it your lower “begin-charging” % value?
In general for me it feels like that the battery lasts a bit longer with LOS 17.1 than with 16 - not sure why.
I used (and use) this app
as well, but for me it does not prevent the random reboots. @d2w what it your lower “begin-charging” % value?
In general for me it feels like that the battery lasts a bit longer with LOS 17.1 than with 16 - not sure why.
I have entered 80% for “begin-charging”.
I still have Reboots, but not so directly related to the charging.
At the moment, mine has been running for 7 days, it may be that it runs for a few weeks, but it can also be that it is rebooting in the next moment, both has already been experienced.
To everyone facing mobile data not turning ON issue.
Could you please check if you have these errors in the log?:Lineage 17.1 - FP2
Based on that we can try some other things.
So what I tried to capture:
Regarding netmgr I see only these kind of messages:
01-11 18:59:52.031 4319 5914 F libc : Fatal signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 0x1c in tid 5914 (netmgrd), pid 4319 (netmgrd)
01-11 18:59:52.035 12255 12255 W netmgrd : type=1400 audit(0.0:54): avc: denied { sys_resource } for capability=24 scontext=u:r:netmgrd:s0 tcontext=u:r:netmgrd:s0 tclass=capability permissive=0
Thanks for investigating this and let me know if you want to see the full logcat.
Gaah. How did I not see this before.
The selinux denial does not seem to be the root cause. Netmgrd crashes also with adapted selinux policy.
Trying to kang netmgrd from a different device.
Chris
For people who experimenting data connection problem:
Then
adb root
adb remount
adb push netmgrd /vendor/bin
adb reboot
And report back…
With the first command “ adb root
” I have the following error
ADB Root access is disabled by system setting - enable in Settings -> System -> Developer options
rebooting in TWRP first solve the issue
System patched, seems to works: After enabling/disabling Airplaine mode → Data is there .
I’ll use it in the next days and report if something strange happens
Awesome. Seems to work. Will test a bit more the next days as well.
Thanks a lot! The above described procedure in my previous post works with the netmgrd you provided, tested on:
Would be interested in some details, can’t really make sense of comparing those binaries. Is it just a newer version?
That’s nice to hear. Congratulations on the fix.
Yes, sorry: you need adb root enabled through the Developer options, yes. You should not need TWRP to do that. Just follow instructions from the error message.
Chris
Will this updated binary be included in coming LOS updates :)?
I had the issue twice today, so I will try the workaround and report.
If you use Magisk it is to enable in Magisk manager, it won’t appear in the developer options (at least it doesn’t for me).
If people confirm it works, then yes!
Chris
I have a similar issue sometimes when I drive my car into the garage (where I lose my mobile carrier), and go upstairs into my flat afterwards (with WLAN Internet): The FP2 connects to WLAN, but I cannot access the Internet anymore unless I reboot the phone.
Would that fix help in this scenario, too? If yes, I would gladly test the fix. Thanks in advance.
After some days testing I can confirm, switching to mobile data and turning it off and on (or using the flight mode) does not have any influence anymore. I would say the fix works.
As posted here, my setup is very simple.
@DeepSea your issue sounds a bit different. If I get it right, you are not able to access the Internet, after you connect to your home WLAN?
Please try it! Netmgrd crashes so it could also be the case here.
Up and running, thanks, mate! Will keep you posted…
I’m getting super excited to feel I will be able reinstall 17 on my phone!
Thanks!
In curious too: I thought /vendor
was for the binary blobs so you couldn’t recompile anything without sources…