FP3 charging port issues

[anon9989719]

Here’s a breakdown of the module.

Even two days isn’t enough soemtimes.

Red Square

Rain water inside - what could be wrong?

Hi and welcome. Further to what @OldRoutard has said it can take days to dry well in a flow of air and ensure you dismantle the phone to get air around the modules and help dry the contacts. For the dampness indicators you will have to dismantle the phone to the point where you remove the screen and then see this post and two above it. hopefully you don’t see a red square. The top left in the top image is the red square in the bottom one. [image]

Breakdown

FP3 Bottom & Top module breakdown

Hi. Images below taken with an FP3+ I have a defunct F3 that I disassembled to see if I could fix it; No luck; but whilst at it I thought I’d take a look at the bottom module as one issue was that it wouldn’t charge. The bottom module can be prised open, it has four small latches, two stainless steel and two plastic, so be careful. I opened the steel one first. Here is the inside of the two halves of the surround. Centre is the slot for the USB C port. The shiny B98CBC is probably the vibrato…