[SOLD] Fairphone 3+ DOES NOT SWITCH ON but good for spares

[hc112]

Fairphone 3+ DOES NOT SWITCH ON
Got water damage inside so tried a new display module and bottom module but it still does not switch on. It’s probably most useful for spares. I will also send the old display and bottom modules in case these were not the issue. They may work if put into another phone.

Includes a green Fairphone 3+ cover.

Free of charge

Shipping from Bristol, UK. Available to ship within the UK only.

---

NB: To be able to send a direct message to the user, you will need to reach trust level 1 by entering/opening at least 5 topics, reading at least 30 posts and spending a total of 10 minutes reading posts.
Be aware, that cross-border shipment of batteries outside a phone is virtually impossible for individuals.

[urs_lesse]

If you happen to have a Torx T5 screwdriver, you can also offer people the “rear module” (and separate it from the motherboard with your data) which is otherwise only available through Fairphone’s repair contractor.

[SOLD] FP 3 sold for pieces (motherboard down)

I green-marked the two Torx T5 screws in this iFixit picture: [rearmodule] After this – If the three small modules (top, camera, bottom) are detached – you just need to lift out the metal shield and the motherboard. EDIT 5 July: detached instead of removed – you actually don’t need to get the three small modules out if you just disconnect the three connector bands that link these with the motherboard.

[hc112]

Update SOLD (can’t figure out how to edit the original post)