Fairphone 2 - dead?

[rvense]

This is the post:

Information about the "debug connector" on the FP2

Hi Luca - See the layout for the USB test points and the debug connector on the FP2 main PCBA: [image] The debug UART console is routed both to two test points and to the B2B connector. I have included the reference of the connector and the matching plug. You can order those at Digikey (and you can get just a few, not a full reel of 6k units). The USB test points are simply pads that expose the USB1 port that is going down the length of the PCB to the bottom modular connector. This is used…

I can’t get my core module out of the back case to access them, though. There are two small Torx screws under the edges of the display connector that I can’t figure out how to get to.