Hi guys, I am trying to install /e/ on my FP3. I got a bootloader code from this FP page : https://www.fairphone.com/en/bootloader-unlocking-code-for-fairphone-3/ When i go for the OEM unlocking and enter the code I get : “Password verification failed”. I have reset the code to give it another …

I worked with this website ! Thank you guys !

“Password verification failed” sounds like you entered the OEM unlocking code in a place that expects your password or PIN.

The system asks first the phone password, then the OEM code I get Password verification failed at the OEM code stage

Just an idea: perhaps you could try with the alternative code generation on z3ntu website, mentioned on the wiki ?

It looks like the unlocking implementation changed in one of the recent versions (maybe with the switch to Android 10). I am trying to look into this once more. A few questions: What Fairphone OS version do you have? Are you connected to the internet (e.g. Wifi) while unlocking? Could you try to …

Perhaps worth a try … [image] Device stuck in fastboot mode after oem re-locking So by the looks of it fastboot oem 8901_unlock can be used if you want to unlock the device without enabling unlocking in the android settings (or inputting the verification code).

Android version : 9 Build number : 8901.2.A.0111.20200131 I am connected to the internet through my sim card (if I use wifi it will try to upgrade to android 10 which I red is unwanted for my purpose). LOGCAT : ~$ adb logcat | grep Oem 11-04 15:40:33.242 2068 2120 I QcrilOemhookMsgTunnel: [0]…

I see, it is not just the code on the phone that changed but also the code on the fairphone website backend. So to unlock your phone using that website you need to be running a more recent version, probably Android 10. You can try to generate an unlock code with the unofficial script / website ment…

I’ve had a similar problem trying to unlock an FP3+. Neither code generated by either the official for the alternative web site worked, but I found fastboot oem 8901_unlock works, which makes enabling unlocking on the phone a bit redundant.

[image] Bernard_Hurley: but I found fastboot oem 8901_unlock works, which makes enabling unlocking on the phone a bit redundant. This command is not being officially communicated, it was found by clever examination. It looks to me like this mainly exists as a tool for support and repair folks…

As I just got a new F3+ I am trying to in stall /e/ os in F3+, in Developer Option I have been trying to unlock the OEM which call for a code. After getting the IMEI (slot 1) number and the Serial number, went to get the code at https://private.z3ntu.xyz/FP3/verify-code.php and https://www.fairpho…

Bootloader Unlocking Code for Fairphone 3 not working

Help Fairphone 3

AnotherElk November 4, 2020, 12:07pm 6

Perhaps worth a try …