🇩🇪 🇬🇧 USB-A Chargers Not Working with FP5 – Any Ideas?

Hello everyone,

I’ve been using my FP5 for about six days now, and overall, I’m quite happy with it. However, I’ve noticed that none of my four USB-A chargers work with the FP5. At the moment, I’m only able to charge it using a USB-C charger, either from my iPad or my girlfriend’s Pixel phone. Does anyone know why this might be? Normally, the USB controller should detect the voltage and current from the charger and adjust accordingly, shouldn’t it?

Looking forward to your insights.

Hallo zusammen,

ich habe seit etwa 6 Tagen mein FP5 und bin insgesamt recht zufrieden. Allerdings ist mir aufgefallen, dass keines meiner 4 USB-A-Netzteile mit dem FP5 funktioniert. Aktuell lade ich daher nur mit dem USB-C-Netzteil meines iPads oder dem meiner Freundin von ihrem Pixelphone. Weiß jemand, woran das liegen könnte? Normalerweise sollte der USB-Controller doch erkennen, welche Spannung und Stromstärke auf welcher Leitung anliegen, und entsprechend entscheiden, wie geladen wird, oder?

Vielen Dank für eure Hilfe

Fairphones are really poorly made.

How is this comment helping with the issue?

@Maiskorn how and welcome to the forum.

Its weird that different USB-A Charger dont work for you, I only use USB-A. So either you had really bad luck with your FP or are your 4 chargers the same type and maybe that could be a reason? Did you try the chargers also with different cables?

3 Likes

Bah just change the charging module.

Thank you for your quick answer. I tried four different chargers and four different cables, all of which don’t use all USB-C pins. I found a fifth charger that supports multiple voltage and current outputs, and when I combined it with a USB-A 3.0 to USB-C cable that has all pins built into the USB-C connector, it worked.

I don’t know why this is happening, and it really shouldn’t be an issue. The other cables have all the necessary pins (ground, power delivery, RX, TX, and configuration) to deliver power to USB-C devices. If this is a common issue with all FP5s, I believe it indicates a serious hardware or software problem that fails to adhere to USB standards.

I’m considering returning the device to the reseller and getting a different FP5. However, if this issue is widespread with the FP5, I might opt for a different brand entirely. Can someone else test this as well?

Here’s a helpful link that explains how USB-C pins are utilized:
https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/

Danke für deine schnelle Antwort. Ich habe vier verschiedene Ladegeräte und vier verschiedene Kabel ausprobiert, die jedoch nicht alle USB-C-Pins nutzen. Mit einem fünften Ladegerät, das mehrere Spannungs- und Stromstärken unterstützt, und einem USB-A 3.0 zu USB-C-Kabel, bei dem alle Pins im USB-C-Stecker vorhanden sind, hat es funktioniert.

Ich verstehe nicht, warum das so ist, und es sollte eigentlich kein Problem sein. Die anderen Kabel haben alle notwendigen Pins (Ground, Power Delivery, RX, TX und Configuration), die ausreichen sollten, um USB-C-Geräte mit Strom zu versorgen. Falls das ein häufiges Problem bei allen FP5-Geräten ist, deutet das meiner Meinung nach auf ein ernsthaftes Hardware- oder Softwareproblem hin, das die USB-Standards nicht einhält.

Ich überlege, das Gerät an den Händler zurückzuschicken und ein anderes FP5 zu testen. Sollte dieses Problem jedoch FP5-weit auftreten, werde ich wahrscheinlich eine andere Marke wählen. Kann das bitte jemand testen?

Hier ist ein hilfreicher Link, der erklärt, wie die Pins bei USB-C genutzt werden:
https://www.allaboutcircuits.com/technical-articles/introduction-to-usb-type-c-which-pins-power-delivery-data-transfer/

1 Like

I dont think that there is any common issue, at least I cant remember reports here in the forum, and as said, I only use very old USB-A Charger.

Edit and to test, would the person not need to have the exact same equipment you are using?

3 Likes

Ich benutze im Alltag sehr viele Ladegeräte und Kabel, von alten Samsung-Ladegeräten mit USB-A bis hin zu welchen mit Quick-Charge und Power-Delivery mit USB-C. Kabel, alt, neu, lang, kurz, A auf C und C auf C und manchmal auch mit A-C Adaptern. Absolut alles funktioniert eigentlich immer normal bei mir.

5 Likes

Hallo Maiskorn, ich habe mal deinen Beitrag genutzt und meine alten Ladegeräte geprüft. Ein altes Samsung von dem ich nicht mal mehr weis von wann das ist mit USB-A auf USB-C funktioniert aber ohne Schnellladung und einen Huawei Supercharger von einem MatePad mit USB-A auf USB-C funktioniert ebenfalls aber auch ohne Schnellladung. Wie die Pins bei den Kabeln belegt sind kann ich allerdings nicht sagen. Ich hatte ein Ladegerät von einem Huawei Nova 9 welches nicht funktionierte aber den Grund dafür habe ich nicht herausgefunden und das Telefon ist mittlerweile mit Ladegerät verkauft. Ich vermute hier war eine zu spezielle Konfiguration des Ladegerätes, da dies auch Supercharging mit 60W konnte, für das mein NOVA 9 ausgelegt war. Für die beiden Fairphone 5 die mittlerweile bei uns benutz werden habe ich MatauMahi 30W USB C Ladegeräte gekauft mit USB-A und USB-C Port und die funktionieren tadellos sowohl im Öko-Modus als auch im schnellen Lademodus und auch egal auf welchem Port.

4 Likes

I regularly charge my FP5 with a variety of random USB A-C leads and haven’t experienced this, so it sounds like it may be an issue with your unit.

4 Likes

Thank you for all the feedback. Since it seems that the problem is specific to my device, I will return it to the seller. I want to thank everyone who took the time to help me. However, I still find it very frustrating, as I have already spent a lot of time transferring data and setting everything up.

Danke für die vielen Rückmeldungen. Da es so aussieht, als würde das Problem nur an meinem Gerät liegen, werde ich es an den Verkäufer zurücksenden. Ich möchte mich bei allen bedanken, die sich die Zeit genommen haben, mir zu helfen. Trotzdem finde ich es sehr ärgerlich, da ich bereits viel Zeit in die Übertragung und Einrichtung investiert habe.

1 Like

Ich würde ja das Problem eher bei den Ladegeräten suchen, das Telefon funktioniert doch offensichtlich einwandfrei.

2 Likes

Just for the record, perhaps you could ask them if you can only get a new charging module, instead of sending the whole device back. I’m not sure if the issue is with that component, but it would be more pleasant for you.

Fwiw, my FP5 also works with all kinds of chargers, I have never had an issue.

1 Like

Ich kann zwar nichts zum FP5 beitragen, aber zur Ladethematik:

Bei einem meiner Devices hatte sich das originale Kabel (zwischen zugehörigem USB A Ladegerät und Device) durch permanente Nutzung nahezu aufgelöst, es ging aber noch. Also ein Originalersatzkabel bestellt und erhalten. Angeschlossen - kein Laden, weder langsam noch schnell. Anderes Device (mein FP3) konnte normal geladen werden.
Im Elektronikladen mit dem Problem - dort mehrere Geräte laden können; eine Erklärung warum das Originaldevice nicht geladen werden kann, nicht erhalten. Weiteres Originalkabel ausprobiert - kein Erfolg. Fremdprodukt von Samsung lies allen Ladekombinationen zu auch mit weiteren USB A Netzteilen.

Nach meinem Eindruck hat das USB C Laden hat eine eigene Intelligenz im Kabel und die Devices tragen teilweise (mind. mal für das Schnellladen) auch eine intelligenz in sich. Fazit: manchmal liegt es am Kabel oder sogar an der Steckrichtung des Kabels im Device. Ob das ein Produktionsfehler ist, weiß ich nicht. Vielleicht hilft dieser Blickwinkel/Erfahrung auch…

2 Likes