Power button not working FP2

[BertG]

For an explanation how to swap the buttons:

Slim Case - Reboots and Button-Issues

The buttons are embedded in flexible strips. These strips are fixated to the case on both sides of each button. It isn’t so obvious at first, but you can carefully pull the strips (including the buttons) off those fixating points. And if you’ve done that, you can carefully fixate the strip with the camera button to the power button’s place (if it won’t snap in place easily, use a fingernail or some not too sharp tip of some kind to gently push it in place) and the strip with the power button in…

ATTENTION when swapping buttons:
The buttons have rounded edges on one side. Make sure to fix them in the right way (rounded eges facing down) or you will have to take them off, turn them around and fix them again. I can tell you from experience, that it’s a bit annoying.