Display problem - whole screen filled with noisy pixels of different colors

I don’t believe it’s a coincident that you have this strange problem AND a lot of dust inside your phone. I believe either there is still some dust left (which you don’t see) and it’s causing the problem or both the dust and the screen issue have the same cause, e.g. something is not assembled right and causing your phone to be leaky and connections to be loose.

Anyways I’d contact Support.

Hi everybody,

I am trying to fix a faulty display and I was hoping someone in the forum might have seen something similar before:
The display shows only colourful noisy pixels - on the complete screen - see the attached picture.


Besides that the phone appears to be functional (i.e., it reacts to the switch on/off buttton).
Has anyone experienced/seen something similar?
I wonder if the error is related to a faulty cable connection. So I am contemplating to take the phone apart and make sure that all cables are properly attached (follow the ifixit instructions to “replace” the display).
Any input if this makes sense - or other suggestions - are very welcome!
Thanks, everybody!
Cheers,
Dino

This problem was already reported before 9 days by another user. A solution was not found yet.

1 Like

I moved your post here and copied your title so it’s easier to find. (What’s wrong with my phone, wasn’t very specific)

1 Like

Thanks, Paul! I searched the forum, but didn’t find this post. Great you had the overview and merged the posts. Cheers!

A post was split to a new topic: Noisy coloured pixels on my Fairphone 2

I am having the same issue. First I thought it was a software problem because it disappeared as fast as it was there. The last time I opened the display and it was getting so worse that I could not use the phone again. Then I cleaned the every contacts and now it is working again. I hope it will last.

2 Likes

thanks for letting us know, gurix!
I will try the same.
Cheers

I reckon a loose display data cable could be the reason for this.
Cleaning the connector and pushing the display data cable into its socket solved the problem for me.
I followed this guide to take the phone apart and get to the display data cable:


Note: make sure not to break the rear-facing camera when disassembling the phone (see comments in the guide - step 18 & 19 ).

1 Like

Thanks just realized, that I was in the FP1 thing but I am having a FP2. Sorry for the mess.

1 Like

@bart_van_oort Does the following solve your problem too?

1 Like

Hi Stefan,

I’ve tried this before. But I will try it again and pay more intention to cleaning the display data socket. Will let you know if it helped! Thanks so far!

3 Likes

A short update:
Unfortunately, pushing the display data cable into its socket solved the problem only for a few days.
Now the connection between the board and the display assembly is sometimes lost - and the noise screen returns.
Pinching the phone at the location where the display data connector is brings back the screen and the phone can be used again.
Until the cable drops out again… so unfortunately, the problem is not solved yet.

In that cas you schould contact support to get a replacement phone.

A post was merged into an existing topic: Noisy coloured pixels on my Fairphone 2

Hello, did you receive help from support? Were you able to solve this problem?
I am having the same problem.
Thank you…!

I would first try to disassemble and reassemble the phone/display. If that does not help, I would suggest to open a ticket and contact support.

Don’t open the phone - I contacted the support and was asked to send the phone in.
Afterwards they refused any replacement since I had opened the phone (which I did since I had to wait several(!) weeks for an answer).
The support was simply pathetic.

Hey,

i don´t know, whats broken or still not working, but look at the picutre. My FP1 only looks like this.
I opened it and don´t can see something wrong. But i am not an expert of course.

Please help. :slight_smile:

Thanks!

A post was merged into an existing topic: Noisy coloured pixels on my Fairphone 2