Wanted bottom module FP2

[anon9989719]

Hi As they are in short supply, if available at all you want like to consider a repair, either yourself or by a shop technician.

FP2 Bottom Module: Repair broken µUSB port and or mic

@JohnHughes (thanks again) send me two broken bottom Modules some days ago. This one has a defekt µUSB port. After disassembling I took a picture with a microscope camera and found some solder cracks. Barely to see without magnification. Two cracks at the shield contacts that I am not too worry about, but also one at contact 5. I am sure that was a slack joint. Some serious force must be acted to the Port. I will try to resolder the joints and hope the bottom module will be able to do its work…

Howto repair the microphone inside the bottom module

As fairphone angel (in Berlin) I have a lot of support cases with nonfunctional microphones in the bottom modul. A lot of users have minimum the 2nd, often the 3rd bottom module. Mostly easily changed by Fairphone support in warranty. But there is a lot of waste (I collect old faulty modules and send them back for recycling). So my questions: Did anyone successfully repaired the microphone inside the bottom module by soldering a new smd microphone? What’s the reason for the highly rate of f…

Bottom module, repaired and tested

Hi community. Offering a bottom module, repaired and tested by myself yesterday. Thanks to @Volker for sending it to me for free. Related to this nice gesture and to make this community very special, I give it to a community member for free. There was a broken solder joint at the mirco usb port. Charging works fine again. Also testet the mircophone. Works like a new one. Just send me a message. Live long and with a Fairphone _\// Comments are closed on this topic. If interested, pl…