Looking for a bottom module for the FP2

[anon9989719]

Hi
Given the demand and short supply have you considered a repair if it the mic or usb.

There are topics/posts on DIY and that could even be used by a repair shop.

Howto repair the microphone inside the bottom module

As fairphone angel (in Berlin) I have a lot of support cases with nonfunctional microphones in the bottom modul. A lot of users have minimum the 2nd, often the 3rd bottom module. Mostly easily changed by Fairphone support in warranty. But there is a lot of waste (I collect old faulty modules and send them back for recycling). So my questions: Did anyone successfully repaired the microphone inside the bottom module by soldering a new smd microphone? What’s the reason for the highly rate of f…

FP2 Bottom Module: Repair broken µUSB port and or mic

@JohnHughes (thanks again) send me two broken bottom Modules some days ago. This one has a defekt µUSB port. After disassembling I took a picture with a microscope camera and found some solder cracks. Barely to see without magnification. Two cracks at the shield contacts that I am not too worry about, but also one at contact 5. I am sure that was a slack joint. Some serious force must be acted to the Port. I will try to resolder the joints and hope the bottom module will be able to do its work…