Hi all I ordered a fairhpone 4 last week however at the time there were no cases available. I absolutely must have a case as I drop my phones often. Does anyone know if there are any 3rd party options for the case ? I’ve got a month until my phone is expected to arrived…

[image] AndreasChris: As for the FP5-Fit of the FP4-Flipcase I have not test device at hand at the moment, but I imagine many of the allignment issues would be gone when the FP5 is inserted into the case, as there are mostly long open stripes along the edges instead of exact cutouts (except for …

As promised earlier, here are some Photos with the FP4 inside the case: [20230927_214844_1] [20230927_213733_1] [20230927_213740_1] [20230927_213705_1] [20230927_213759_1] [20230927_213711_1] [20230927_213657_1] [20230927_213653_1]

I also just noticed, that it is actually possible to use the case as a stand (e.g. for watching videos): [snapshot_20230927_sq] (sorry for the bad photo quality in this instance - i took this one with a rather rudimentary laptop webcam)

Thank you for the comprehensive report. Photos 5, 7 and 8 also provide some reasonable hope that the FP5 power and volume buttons (which are spread a bit more widely than their counterparts on the FP4) will most likely be all out in the open and fully accessible and usable in this case as well. Than…

[image] urs_lesse: Thanks for planning another FP5 in FP4 case test. :slight_smile: It’s done. I just followed up with a report in your thread .

Hey FP community, As a FP4 user and sustainability enthusiast I created a website for customizable and on demand printed phone cases: indimise.com You can individualize fp4 and fp3 cases. What do you think about it? [PXL_20230907_155702350]

Looks really nice. Do you also sell the .stl files for self-printing?

Glad you like it! For now I don’t sell the STL. But let me know if you want to print your design on your own. Just take in account that the designs are optimized for PA12 in SLS.

my rowan Bark case has just arrived. while I love the look and feel of it, I’m afraid I’ll end up returning it. the USB port cutout appears to be wide enough at first, but the charging cables that I’ve bought a while ago have their plugs juuuuuuust a little bit too wide: …

Why don’t you just cut, file or grind the whole a little bit wider?

Fairphone Community Forum

Fairphone 4 case & Alternatives

Discuss The Products

case, fp4

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled