Canot login/unlock Fairphone 3, how to factory reset?

Hi,

when I start the Fairphone 3 there is a message on the locked screen in German “Der Speicherplatz wird knapp” Einige Systemfunktionen funktionieren eventuell nicht." in English that would be the storage is full, something might not work. If I enter the correct pin the screen gets black for a one-second then there is the lock screen again. If a wrong pin get entered, there is instant feedback that this was the wrong pin.

If I start the recovery mode, I see the Android logo with a red error sing and “No command”.

I tried briefly holding the power button and briefly pressing the volume up button like suggested in the forum [ "No command" message ] but it did not change anything.

It is possible to start fast boot but since the device stat is locked I do not know any commands that would work. Are there any, since I know the pin of the device?

Is there a way to factory reset the device? Or to clear the storage?

The data on the phone is not that imported, but it would be good to be able to use it again.

Thanks for your assistance!

I removed the picture as it contained serial number etc.

Reg recovery: did you try several times to get past the robot, its a bit tricky. However from the bootloader (your picture) you can start into recovery as well, does this also brin you to the no command window?

Thanks for carrying about my privacy, I tried to include as much information as possible.

I tried several times to get past the robot. With restarting and pressing the volume button and via the recovery. But without any success.

The point is stay on this screen and try tonpress the 2 buttons in different ways, its really sometimes annoying

Did you ever work with adb/Fastboot so is OEM unlocking enabled and USB debugging?

Otherwise have a look here if there is anything useful

Sadly, on this device, fastboot and adb are not enabeled.

With “tonpress the 2 buttons” do you mean the power button and the volume UP button or another button?